ANTI-X LEAD DOORS – SWING MODEL

In the anti-X lead swing door, the panel is made with hardwood and cardboard honeycomb, interposed with a brushed and calibrated lead sheet.

Coating with high pressure laminate (HPL), to be choosed among a wide range of colors;
Edges covered with extruded aluminum profiles;
Supporting frame made of extruded silver aluminum with a leaded labyrinth in order to guarantee shielding continuity;
Width of the frame 16cm, thicker frame upon request;
Three-wing hinges with oversized steel pin inserted in self-lubricating bushings;
Door equipped with handle and latch lock with yale cylinder;
On request, the door can be equipped with a leaded glass size cm. 30x24h / 40x30h.

SKU: N/A Category: DOORS

In the anti-X lead swing door, the panel is made with hardwood and cardboard honeycomb, interposed with a brushed and calibrated lead sheet.

Coating with high pressure laminate (HPL), to be choosed among a wide range of colors;
Edges covered with extruded aluminum profiles;
Supporting frame made of extruded silver aluminum with a leaded labyrinth in order to guarantee shielding continuity;
Width of the frame 16cm, thicker frame upon request;
Three-wing hinges with oversized steel pin inserted in self-lubricating bushings;
Door equipped with handle and latch lock with yale cylinder;
On request, the door can be equipped with a leaded glass size cm. 30x24h / 40x30h.

Composition

Protection degrees

The grade of the lead shielding, therefore the thickness of the lead foil within the door, changes in relation to the radiation level emitted by the equipment positioned inside the client’s radiologic room. The information regarding the equipment radiation level is given by a Qualified Expert only after a proper and specific consultation.

The most common lead thickness for this product are: Pb mm 1, Pb mm 2, and Pb mm 3.

Laminate coating

The PRINT HPL laminate (High-pressure decorative laminates) identifies the high-pressure decorative laminate, a panel consisting of layers of cellulose fibers impregnated with thermosetting resins subjected to a high pressure process consisting in the simultaneous application of heat and pressure. This determines the fluidization and contextual polycondensation of the resins from which a homogeneous, non-porous material with the required surface finish is obtained. Essentially 60% of the HPL laminate consists of paper, while the remaining 40% consists of thermosetting resins (phenolic resin for the internal layers and melamine resin for the surface layer(s)).

The PRINT HPL laminate is also available in the slow flame propagation version (called “F1”) which thanks to the particular composition – in any case halogen-free – guarantees an even higher reaction to fire performance than the standard version.

The plastic laminate coating offers a wide variety of colors available.

The standard color is Bianco Primavera (Spring White).

Standard accessories

Adjustable three-wing hinges with an oversized stainless steel pin inserted in 2 self-lubricating nylon bushings that allow the door to rotate up to 180°. Rotation center 20 mm.;

Accident prevention handle in satin finish aluminum. Possibility of installing fixed knobs even only on one side of the door, and integrate anti-bacterial handles upon request only;

Lock for flush interior doors or swing doors with polyamide central latch, that gives the door an incredibly silent closing. European cylinder YALE type;

Gasket inserted on three sides of the frame, in correspondence with where the door stops, and in the points where the frame embraces the wall. It reduces closing noises, blocks drafts, improves sound insulation, and covers the jamb fixing screws;

Accessories on demand

Micro-switch, an electric contact positioned on the door stop. The function is to immediately stop the working equipment inside the room, in case the door is opened, to prevent the X-rays to escape. The installation is at the Client electrician’s charge;

Leaded window installed on the door wing, its level of protection matching the one of the door. It’s a very useful accessory used to keep an eye on the patient during examination;

It is possible to paint the frame using a wide range of colors and finishes, it can be customized according to the customer’s choice. This operation implies an increase in production times. Painted with non-toxic paints, it makes the frame easy to clean and greatly elevates it in terms of aesthetics;

Door closer with stop and compass arm, the model varies according to the weight of the door. Satin silver aluminum finish;

X-ray warning lights, used to signal to those outside the room that inside the equipment is emitting radiation. Available in two models: wall-mounted for front rooms and flag-shaped for hallways.

Cleaning and disinfection

For cleaning, use non-abrasive cleaning tools. Possibly avoid leaving dirt and stains for a long time on the surface of the laminate. To avoid leaving marks, always remove the detergent, rinse, and dry well. It is advisable to proceed with a preliminary test on a small portion of the surface. Do not use aggressive products (such as, but not limited to: muriatic acid, products for cleaning silver and caustic soda).