NON-MAGNETIC STRETCHERS – FIXED HEIGHT MODEL

Stretcher suitable for patient trasfer in MRI up to 3 Tesla.

  • Perimetral frame in stainless steel;
  • Sliding on n° 4 smooth swivel wheels Ø 100 mm with locking function;
  • Two-section model, the upper part being the headrest, adjustable and lockable up to + 30°;
  • In order for these stretchers to be accessible from both sides, the potential side safety rails can be adjusted in height through an easy twist mechanism and can be locked in its defined position by means of a simple bolt;
  • Graspable in three different positions for easy and safe handling;
  • Mattress built into the board, thickness 64 mm.

Contact us for more information

This product is currently out of stock and unavailable.

SKU: R-MN-82 Category:

Stretcher suitable for patient trasfer in MRI up to 3 Tesla.

  • Perimetral frame in stainless steel;
  • Sliding on n° 4 smooth swivel wheels Ø 100 mm with locking function;
  • Two-section model, the upper part being the headrest, adjustable and lockable up to + 30°;
  • In order for these stretchers to be accessible from both sides, the potential side safety rails can be adjusted in height through an easy twist mechanism and can be locked in its defined position by means of a simple bolt;
  • Graspable in three different positions for easy and safe handling;
  • Mattress built into the board, thickness 64 mm.

Characteristics

  • External dimensions with siderails: cm 190 x 79,5 x 65/70/75/80 h (to be chosen at no additional cost)
  • Platform dimensions: cm 190 x 65
  • Siderails dimensions: cm 80 x 25 h
  • Capacity: kg 200
  • Weight: kg 41

Accessories on demand

  • Stainless steel drip stand, height 1700 mm, with four hooks and fixing bracket with screw system. Any modifications are available to a limited extent.

  • Paper roll holder mounted inside the frame at the leg end.

  • Fixing belt to secure the patient’s position. Cm 220/260 x 25.

Upholstery

The synthetic leathers used for the upholstery are characterized by their tensile strength, durability, longevity, easy cleaning and resistance to disinfectants. A large selection of colours is available:

The upholstery is certified

  • Biocompatible
  • Fireproof
  • Tearproof
  • UV resistant
  • Seawater resistant
  • Resistant to repeated tensions

Labeling

“MR CONDITIONAL” LABEL

This label identifies that the product is safe under certain conditions, in this case in MRI rooms up to 3T, and these conditions must NEVER be removed.

Cleaning and disinfection

Use normal water-soluble, bactericidal, pH neutral disinfectant products for surfaces.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.